• These lifts will handle engine and transmission assemblies, gas tanks, drive axle assemblies, engine/transaxle assemblies, electric vehicle batteries, and more.
• Scissors-type design allows access to all four sides of a component.
• Two independent adjusting screws tilt the table ±15° side-to-side, or fore and aft. Can be operated manually or with non-impact air wrench.
• 20" x 32" table.
• Larger casters provide enhanced mobility under heavy loads.
• Air / hydraulic operation – Foot control pump with hose allows movement around lift.
• Minimum height is 31-1/2" with an 74-1/2" maximum height.
|