• 26 piece set is made in the U.S.A., featuring the SK's High Visibility technology.
• The sockets are coated with a rust-preventative compound, which makes them exceptionally resistant to corrosive factors.
• In addition to the rust-preventative coating, the sockets are laser engraved every 120° with extra-large markings for improved readability.
• All the SK impact sockets feature the SK's SureGrip® hex design, which drives the side of the hex, not the corner.
• This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool.
• Extra recess depths to allow for use where threaded fasteners protrude above the nut or where the fastener is domed.
• The nose-down design extends the taper as far as possible, for improved access over straight wall designs.
• Extra recess depth and nose-down design Corrosive resistant and laser engraved every 120°
• 1/2" Drive Deep High Visibility Impact Sockets - 10MM, 11MM, 12MM, 13MM, 14MM, 15MM, 16MM, 17MM, 18MM, 19MM, 20MM, 21MM, 22MM, 23MM, 24MM, 25MM, 26MM, 27MM, 28MM, 29MM, 30MM, 32MM, 33MM, 34MM, 35MM, 36MM
|